Performance SXS Bushings Complete A-Arm Kit
2008-2020 Kawasaki TERYX
Performance SXS Bushings will replace your stock bushings on your ride with a higher quality longer lasting bushing. Greatly improved materials and much tighter tolerances allow them to outlive stock bushings by thousands of miles. The new style bushing design from Kawasaki demands superior material and Performance SXS bushings has stepped up to the demand. They have design their best bushings yet with the highest quality materials available! This is the highest quality bushing set on the market. As always they are covered by Performance SXS bushings lifetime warranty!
- Made in USA!
- Lifetime Warranty
- O-ring sealed
Bushings must have grease when installed.
Complete A-Arm Kit
Install grease fittings first. Then use a rubber mallet (Do not use a vise on these) to gently tap BOTH bushings in each end, Pack with grease inside and on pin. With opposite side on a solid surface use a mallet to tap the steel pin all the way in. to Once the bushings are properly installed and a arms are on the machine, use a grease gun connected to the grease zerk fittings to pump grease into the bushing. You should pump grease until you feel resistance and then stop, do not force grease in after you begin to feel resistance as this could damage the O-ring seals. You should try to pump grease into the grease zerk fitting at each maintenance interval but after the initial installation they should not take much, if any grease.
Installation Instructions not currently available online