×

All Options are Required.

RZR Turbo Billet Wastegate Kit

SKU: 115-1009
RZR Turbo Billet Wastegate Kit
RZR Turbo Billet Wastegate Kit
RZR Turbo Billet Wastegate Kit
RZR Turbo Billet Wastegate Kit
RZR Turbo Billet Wastegate Kit

RZR Turbo Billet Wastegate Kit

SKU: 115-1009
Regular price $150.00
/
Shipping calculated at checkout.


2018 - 2021 Polaris RZR Turbo S

2022+ Polaris RZR Turbo R

Instruction Manual
Download

RZR Turbo Billet Wastegate Kit

 

  • Kit fits 2016-2021 RZR Turbo, Turbo S & 2020-Up Pro XP/Turbo R Models
  • The standard 5-11psi wastegate kit is adjustable from 5.5psi to 8psi with the installed spring and also includes an optional 7-11psi spring.  This works excellent for those needing a little more crack pressure than can be achieved with the OEM wastegate, especially in higher altitudes.  
  • The 5-8 psi wastegate spring that comes in the actuator kit allows you to easily adjust for those running our tunes that require the crack pressure to be at 6.5-7psi
  • Factory crack pressure is 5.5psi and unlike others on the market, the 5-11psi actuator kit can be set to a true stock PSI setting so you don't get over boost when setting up your wastegate on a stock RZR.  
  • Great replacement for your worn out wastage actuator.  As springs age and with more run time, they wear out.  This may cause a low boost condition resulting in less power and more heat created.
  • We also have a 7-18psi wastegate kit that has a 7-11psi actuator spring, with an optional 14-18psi spring.  This should only be used for custom applications where the tune is built for the higher pressure actuator. 
  • Easy to adjust crack pressure when or if needed.
  • Installation is not hard but normally takes 1 to 1.5 hours. This Requires loosening the turbo bracket and removing the oil feed/drain line from the turbo.  Instructions included.
  • We highly suggest adding our wastegate pressure pump to properly set this valve up to the correct crack pressure
  • If running AA tunes, see the tune product description as it will list proper crack pressure needed with tunes (If not listed, 5.5-6psi is standard)
Recently viewed