×

All Options are Required.

Aftermarket Assassins Stage 2 Upgrade Kit for 2023+ Can-Am Maverick X3 135HP to 220+HP

Aftermarket Assassins SKU: 113-1038-2
Aftermarket Assassins Stage 2 Upgrade Kit for 2023+ Can-Am Maverick X3 135HP: intercooler with fan, HP Tuners RTD device, charge tube, BOV, wastegate, catch can, S2 clutch kit and full exhaust
Aftermarket Assassins dyno chart for the 2023 Can-Am X3 135HP: Level 2, 3 and 4 intercooled tunes, 186 to 204 rear wheel horsepower

Aftermarket Assassins Stage 2 Upgrade Kit for 2023+ Can-Am Maverick X3 135HP to 220+HP

Aftermarket Assassins SKU: 113-1038-2
Regular price $3,875.00 Sale price $3,675.00 Save $200.00
/
Shipping calculated at checkout.

  • Safe & Secure Checkout
  • FREE SHIPPING OVER $300
    *Some Exclusions Apply
  • 30 Day Returns
  • In stock, ready to ship
  • Inventory on the way

2023-2026 Can-Am Maverick X3 135HP base, non-intercooled (2 seat)
2023-2026 Can-Am Maverick X3 Max 135HP base, non-intercooled (4 seat)
Fits only the 135HP base, non-intercooled X3 (Aftermarket Assassins)

Installation Instructions not currently available online

Aftermarket Assassins Stage 2 Upgrade Kit for 2023+ Can-Am Maverick X3 135HP to 220+HP

The 2023 and newer Can-Am Maverick X3 135HP is the base, non-intercooled X3, and it has a lot of power left on the table. This Aftermarket Assassins Stage 2 kit adds everything the engine needs to make that power safely: a custom AA tune on the HP Tuners RTD device with ECU unlock, an intercooler with fan, an AA wastegate, an S2 clutch kit, a blow off valve, charge tube, catch can and a 3 inch full exhaust. Depending on the tune you choose, the X3 goes from roughly 150 crank horsepower stock to 210 to 250 crank horsepower.

WHY A STAGE 2 KIT INSTEAD OF A TUNE ALONE

A tune by itself can only raise boost so far before intake air gets too hot and the engine pulls timing to protect itself. The intercooler cools the air coming out of the turbo, so the engine can safely run 16 to 21 PSI of sustained boost instead of the factory 7 to 8 PSI. The AA wastegate kit lets you set the wastegate crack pressure each tune level calls for, and the S2 clutch kit recalibrates the clutch so the extra power reaches the ground at the right RPM. The full exhaust lets heat escape, which Aftermarket Assassins measured at 4 to 7 more rear wheel horsepower depending on tune level, with less power fade on long pulls. Every intercooled tune level requires clutching and the AA wastegate kit, and this kit includes both.

WHAT'S INCLUDED

  • HP Tuners RTD device (MPVI3) with ECU unlock, performed at the HP Tuners facility in Illinois
  • OBDII to Can-Am diagnostic port cable
  • The credits needed to flash your ECU
  • One Aftermarket Assassins custom tune (the Tune you choose above; all four intercooled tunes are available for $150 more)
  • Black intercooler with fan
  • AA wastegate (7-18 PSI kit)
  • S2 clutch kit: 3 AA Recoil magnetic adjustable clutch weights, AA secondary spring and a setup guideline
  • Blow off valve (BOV)
  • Charge tube and clamps
  • Catch can
  • AA 3 inch full exhaust

CHOOSING YOUR TUNE

Each tune level is written for a specific fuel octane. Boost figures are AA's reference numbers at sea level to 2,000 feet; altitude and temperature change actual boost. AA measured a stock X3 135HP at 128 rear wheel horsepower (roughly 150 crank horsepower) on its dyno.

  • Level 2 Intercooled: 91 octane. 19-20 PSI peak, 16-17 PSI sustained. About 186 rear wheel / 210-220 crank horsepower. Wastegate crack pressure 7-8 PSI.
  • Level 3 Intercooled: 91-93 octane. 20-21 PSI peak, 18-19 PSI sustained. About 196 rear wheel / 220-230 crank horsepower. Wastegate crack pressure 8-9 PSI. Needs the exhaust (included), or 93 octane minimum with the stock exhaust.
  • Level 3.5 Intercooled: 93 octane. 21-22 PSI peak, 19-20 PSI sustained. About 200 rear wheel / 230-240 crank horsepower. Wastegate crack pressure 9-10 PSI. Needs the exhaust (included), or 95 octane minimum with the stock exhaust.
  • Level 4 Intercooled: 98-100 octane. 22-23 PSI peak, 20-21 PSI sustained. About 204 rear wheel / 240-250 crank horsepower. Wastegate crack pressure 10-11 PSI. Needs the exhaust (included).
  • All Intercooler Tunes: Levels 2, 3, 3.5 and 4 loaded so you can switch tunes to match the fuel you have.

WHAT THE AA TUNE CHANGES

  • Much quicker throttle response, with throttle-by-wire adjusted per drive mode and gear: snappy in sport mode, still smooth for crawling and loading on a trailer
  • Throttle-by-wire limiters disabled, with more throttle opening allowed in low gear and reverse
  • Fan on/off lowered to 185/180 degrees F (factory 203/198) for cooler engine and charge temperatures
  • Speed limiter removed in low and high gear; top speed depends on gearing, tire size and load
  • Rev limit raised to 9,000 RPM for overshoot (optimum peak RPM is 7,900-8,200)
  • Two-foot limiter (gas and brake at the same time) and seatbelt limiter disabled
  • Overboost, underboost and intake plenum leak codes desensitized, torque limits properly raised
  • Timing and air/fuel ratio tuned and verified for each octane level; cruising mileage stays good
  • The RTD device also lets you data log engine parameters and read and clear trouble codes

ECU UNLOCK OPTIONS

The tune can only be loaded onto an unlocked ECU. Choose how you want that done:

  • Standard Unlock (average 10-15 business days): after your order, Rugged Terrain will email you instructions for sending your ECU to HP Tuners. You ship the ECU to HP Tuners, they unlock it in 5-10 business days and send it back by standard ground shipping, so total time depends on your distance from Illinois.
  • Express Unlock (average 5-10 business days, continental US 48 states only): Rugged Terrain will email you a UPS Next Day Air label and instructions. Attach the label to your ECU package and drop it at a UPS location. HP Tuners unlocks it in 5-10 business days and returns it Next Day Air. Other parts on the order ship ground. Same-day programming and UPS delays cannot be guaranteed.
  • Unlocked ECU Outright: you receive a new BRP ECU that is already unlocked but blank, so you never send your own ECU away. It must be programmed to your vehicle with BRP/Can-Am BUDS2 software, because the gauge cluster stores the ECU information. All Can-Am dealers and many shops have BUDS2; find one willing to do it before choosing this option.
  • Exchange ECU: same as the outright option (unlocked, blank, needs BUDS2 programming), but the ECU is a used unit in good working order and carries a $995 core charge. $795 is refunded when your original ECU is returned as the core, so it costs $200 more than the standard unlock and saves time. If the outside look of the ECU matters to you, choose the outright option.

When you ship an ECU, insure it for $500. UPS has been the most reliable carrier in Aftermarket Assassins' experience, and Aftermarket Assassins is not responsible for shipping delays or lost ECUs. ECU removal instructions are emailed with your order. After the first unlock, the ECU can be flashed at any time.

DETAILS - PLEASE READ

  • Fitment: 2023-2026 Can-Am Maverick X3 135HP base, non-intercooled models, 2 seat and 4 seat (Max). Choose your year and seats above so the tune is built for your machine.
  • Intercooler fit: the intercooler is oversized, so slight trimming is needed to drop it into the housing. The factory shroud over the intercooler is not used.
  • Clutch puller needed: a primary clutch puller is required to pull the primary clutch and install the clutch weights (it can be done on the vehicle). See the Heavy Duty Can-Am X3 Primary Clutch Puller.
  • Flashing: a Windows laptop and basic computer skills are needed to flash the ECU. Flashing instructions are emailed with your order.
  • S3 clutch upgrade: the S3 kit adds the AA adjustable helix (Performance or High Load) for $300 more. Choose it in the Upgrade to S3 Clutch Kit option above; it is added to your cart as its own line.
  • Questions about your build or tunes: email Info@RuggedTerrain.com with your order number.
  • Recommended with this kit: the Aftermarket Assassins Stryker CVT Belt for Can-Am Maverick X3.
  • Shipping weight: 70 lb (box 36 x 27 x 21 in).
  • Part number: 113-1038-2

Why Rugged Terrain is a Trusted Source for UTV Parts

Recently viewed