×

All Options are Required.

Aftermarket Assassins Stage 4 Lock & Load Kit for 2021+ RZR Pro XP / Turbo R / Pro S

Aftermarket Assassins SKU: 113-1012-4
Aftermarket Assassins Stage 4 Lock & Load Kit for 2021+ RZR Pro XP, Turbo R and Pro S: AA Big Turbo, PV3 tuner, S3 clutch kit, BOV, charge tube, intake tube, spark plugs and exhaust

Aftermarket Assassins Stage 4 Lock & Load Kit for 2021+ RZR Pro XP / Turbo R / Pro S

Aftermarket Assassins SKU: 113-1012-4
Regular price $4,235.00 Sale price $4,095.00 Save $140.00
/
Shipping calculated at checkout.

  • Safe & Secure Checkout
  • FREE SHIPPING OVER $300
    *Some Exclusions Apply
  • 30 Day Returns
  • In stock, ready to ship
  • Inventory on the way

2021-2024 Polaris RZR Pro XP (2 & 4 seat)
2025+ Polaris RZR Pro XP (2 & 4 seat)
2022-2024 Polaris RZR Turbo R (2 & 4 seat)
2025+ Polaris RZR Pro S (2 & 4 seat)
Does NOT fit the 2020 Pro XP

Instruction Video

Aftermarket Assassins Stage 4 Lock & Load Kit for 2021+ Polaris RZR Pro XP, Turbo R & Pro S

The Stage 4 Lock & Load kit is AA's big turbo package for the 2021 and newer RZR Pro XP, Turbo R and Pro S, 2 and 4 seat: the AA Big Turbo plus everything in the Stage 3 kit, with tunes from trail-friendly Level 2 up to about 330 crank horsepower on a built motor with race fuel or E-85. It does not fit the 2020 Pro XP.

WHY THE AA BIG TURBO

This is not just a billet wheel on the factory turbo. The AA Big Turbo has a larger compressor wheel and housing, so it moves more air per turbo RPM and keeps boost temperatures much lower than the factory turbo, even above 25 PSI. A larger exhaust housing and high flow turbine let that air out, cutting back pressure and the exhaust heat that limits the factory turbo. The weak factory wastegate is replaced with a high pressure billet wastegate actuator on a new stainless steel bracket for consistent boost. Each turbo is blueprinted and balanced with new bearings by a professional turbocharger builder.

WHAT'S INCLUDED

  • AA Big Turbo with AA billet wastegate, new cylinder head to turbo gasket, exhaust outlet bolts and drain tube o-ring
  • PV3 tuner loaded with your AA big turbo tune
  • AA S3 clutch kit with setup guideline for your tire size and tune level (29-35 in tires)
  • P90X butter shift washers and clutch limiter
  • Billet blow off valve (BOV) with filter
  • AA single muffler exhaust
  • High flow charge tube
  • High flow post-airbox intake tube (or the catch can version, see Add-On Options)
  • Iridium spark plugs, pre-gapped

CHOOSING YOUR TUNE

One AA big turbo tune is included, along with your stock tune, on the PV3. For reference, a stock machine makes 156-158 rear wheel horsepower (RWHP), 181 crank horsepower per the factory. On AA's dyno this kit made 261 RWHP at 28-29 PSI on 110 octane and 267 RWHP on E-85, a calculated 320-330 crank horsepower. AA's dyno reads a bit low compared to some.

  • Level 2 (91 octane, about 215-220 crank HP): 17.5-18 PSI, 15-20 RWHP over a stock Pro XP. Great drivability and fuel economy for trail riding, with cooler intake temps than the factory turbo.
  • Level 3 (91-93 octane, about 230 crank HP): 18-19.5 PSI, 182-185 RWHP.
  • Level 3.5 (93 octane, about 240 crank HP): 19.5-20 PSI, 192-195 RWHP. The most you can get on pump gas.
  • Level 4 (98-100 octane, about 270-280 crank HP): 23-24 PSI, 220-225 RWHP. Mix race fuel with pump fuel, or add a can of VP Octanium or Boostane to the tank. In most cases it runs on a stock motor with the head bolts torqued to 85 ft-lbs or head studs installed; safer on a built motor.
  • Level 5 (110 octane, about 290-300 crank HP): 26-27 PSI, about 245 RWHP for all-day running. Leaded fuel is harder on O2 sensors; keep a spare or run MS109 unleaded.
  • Level 5R race (110 octane): 28-29 PSI, 261+ RWHP (calculated 310-320 crank HP).
  • Level 6 (E-85, about 320-330 crank HP): 26-27 PSI. Runs cooler and uses more fuel; pump E-85 must be 70-85% ethanol.
  • Level 6R race (E-85): 28-29 PSI, 267 RWHP.

Requirements: Levels 2 to 4 run on the stock injectors. Levels 4, 5 and 6 require the catch can intake tube and head bolts torqued to 85 ft-lbs or custom AGE 625+ head studs. Levels 5 and 6 require the AA 1200cc injectors, which are included in their price, and all your tunes are then built for those injectors. Running over 25 PSI (Levels 5 and 6) requires a billet crankshaft; the factory crank will most likely have issues. The race tunes (5R and 6R) require custom AGE 625+ head studs torqued to 95 ft-lbs, are mostly for drag racing, and are run at your own risk. Most builds at this level use a Brian Crower billet crank, Carillo rods, CP pistons and ARP AGE head studs.

The PV3 boost gauge reads to about 22-23 PSI depending on altitude, so higher boost needs a manual gauge to see. Boost levels are reference numbers; altitude, temperature and charge temps change the final boost.

CHOOSING YOUR HELIX

  • High Load 1062: slightly less aggressive than the Performance helix with good acceleration and power transfer over the factory helix. Built for heavier vehicles, heavier tires, heavy sand or crawling. An excellent all-around helix. Pro XP 2 seat: 30-35 in dirt tires or 30-32 in dune paddles. Pro XP 4 seat: 30-35 in dirt tires or 28-32 in paddles. Turbo R / Pro S 2 and 4 seat: 32-37 in dirt tires or 30-33 in paddles.
  • Performance 1065: aggressive, for acceleration, higher horsepower and fast-paced drivers; works best on a tuned machine. Not suggested for Turbo R / Pro S 4 seat models. Pro XP 2 seat: 30-32 in dirt tires or 30-32 in paddles. Pro XP 4 seat: 30-31 in dirt tires or 28-30 in paddles. Turbo R / Pro S 2 seat: 32-33 in dirt tires.
  • Keep EBS: like the factory engine braking. Most slower-pace riders (mud, crawling, very hilly terrain) keep it. Gets rid of the chatter noise, with a decel whine.
  • Remove EBS: removes the EBS pocket in the helix. Gets rid of the roller clunk, with a decel whine. Most faster trail riders, racers and dune riders remove it.

WHAT THE AA TUNE CHANGES

  • Quicker throttle response and power delivery, throttle-by-wire limiters disabled
  • Fan on/off at 185 degrees F (stock 190), and the fan ramps up faster to keep you cool
  • Seat belt limiter disabled; speed limiter removed in low and high gear
  • More throttle and boost in low gear and reverse; rev limit at a safe 9,300 RPM
  • No need to send in your ECU: plug the PV3 into the diagnostic port, choose the tune and flash it. The PV3 also reads and clears most trouble codes and data logs 32 parameters at the push of a button for review on a Windows computer.

ADD-ON OPTIONS

  • Post-Airbox Intake Tube: the standard intake tube is included (great for Levels 2-3). Choose the catch can version (+$150), required for Levels 4, 5 and 6.
  • Clutch Kit Additions: keep the factory P90X primary clutch, add the AA Revolver tower lock cover for it (highly suggested if you keep the factory primary), or upgrade to the AA HD primary clutch. Pulling the factory clutch for the HD upgrade needs the P90X primary clutch puller, which you can add with it. The Stage 4 also offers the standard Polaris puller with the HD clutch, for pulling the AA HD primary clutch later.
  • Want it quieter? Add the AA Slip-On Stealth Quiet Cap for the exhaust.

SUGGESTED CLUTCHING ITEMS

DETAILS - PLEASE READ

  • Start in any gear: the tune is set up like the factory, starting in park only with the brake. If you want it to start in any gear with the brake, email Info@RuggedTerrain.com with your order number. Keep in mind this removes a safety feature, and starting without the brake will throw a code.
  • Questions or setup help: email Info@RuggedTerrain.com.
  • Extra tunes: to add more big turbo tunes, email Info@RuggedTerrain.com.
  • Shipping weight: 55 lb.
  • Part number: 113-1012-4

Why Rugged Terrain is a Trusted Source for UTV Parts

Recently viewed