Aftermarket Assassins Wide S3 Recoil Clutch Kit |17+ RZR XP Turbo 64"

• S3 Recoil Clutch Kits pack a huge punch!  No matter the terrain, they hit hard and just keep pulling for days.  On the trail or at the race you'll notice wicked acceleration and instant clutch response when getting back into the throttle after hammering that corner.  In the dunes, you'll see the same benefits, but also have much less bogging when climbing that big dune.  The machine will hold RPM so you can get where you need to go and get there faster!  Going mudding?  Our mud setup will help turn those tires through the thick and deep with much better RPM and wheel speed that's key to climbing out of that hole. We have a huge amount of CVT knowledge, a great passion for the sport, and spent many hours testing different setups in the real world.  We know you'll be extremely pleased with the performance gained from our clutch kits! 
• Fits 2017-20 RZR XP Turbo Models 2 & 4 Seat.  If you have a Turbo S please see our S3 kit specifically for the Turbo S.
• ** DOES NOT FIT 2021 MODELS**
• S3 kits include our custom cut helix which will give you better power to the wheels on 2017-18 models because of the slightly steeper angle.   All models will see a more consistent RPM sweep.  Factory helixes start off steep, then go shallower on the top end.  For turbo machines, this is completely backward. We run a straight angle as changing the load on a heavy machine in the middle of a shift can cause some issues.  Basically, the 2016 helixes were too steep and therefore had belt issues, 2017 helixes went MUCH shallower and the performance of the wheels suffers.  We found just the right angle to make everything happy with great belt life and great performance.
• Kits work great with both stock or modified machines
• A must-have when tuning your XPT
• A must-have when running larger tires or paddles
• Huge acceleration gains
• Wicked throttle response when on & off the throttle
• More efficient power is transferred to the wheels
• More consistent clutch performance
• Cooler running belt temps (especially when running larger tires or paddles!)
• Longer belt and clutch life
• Easily adjustable if needed
• Please see the helix options below:
• Torsion Anti-Chatter Kit: Upgrades to a complete secondary converted to a Torsion-style spring and helix. The main benefit is better belt grip with the Torsion spring that gains rate as it shifts. Constant pressure against the helix buttons for less annoying secondary clutch chatter which also extends the life of the buttons. You'll also notice smoother engagement which is excellent for those crawling. Secondary bushing comes peened over to prevent walking out. The Torsion kit slightly limits top speed and should be used with the AA primary clutch limiter. 80-85 MPH top speed for most models.
• Performance Helix 1031/Torsion 1026 (aggressive holeshot):  For 2-seat XPT 28-32" Tires / 28-32" paddles.  This helix works excellent for the listed setups and has a more aggressive shift angle from 0-25mph over the 1024 performance helix.  This is best for holeshots and aggressive riders that are trail riding, dune riding racing, and drag racing.  This setup will still crawl well when needed, but if your riding is more slow speed/crawling, we'd suggest the 1024 helix or 1032 Torsion helix.  
• Performance Helix 1024:  For 2 or 4-seat XPT 28-32" Tires or paddles.  The only difference over the 1031 performance helix is the shift angle from 0-25mph is slightly less aggressive. This makes it better for crawling and those slow-speed situations, but it still pulls like crazy when needing to accelerate hard.  **Keep in mind if you have a 2018+ 4-seat model they are geared higher.  If your tires or paddles are 31-32" and heavy, you may want to go with the high-load clutch kit**
• High Load Helix 1021/Torsion 1032:   For 2-seat XPT 34-35" Tires.  For 4-seat XPT 32-35" tires / 32" paddles.  If you are using very large/heavy tires, the high load helix might be the choice for you.  The high load helix is recommended for those turning heavy 34-35" tires.  This angle slows the shift down to help act like it's "gearing down" the secondary clutch.  This helps not over-shift and cause belt slip.  **Keep in mind if you have a 2018+ 4-seat model they are geared higher.  If your tires or paddles are 31-32" and heavy, you may want to go with the high-load clutch kit**
• If you need a higher engaging spring for drag racing please let us know. 
• Our Recoil clutch weights are easily adjustable with simple magnets.  They have a custom AA profile, the BEST coating on the market (nitrocarburizing) which has increased wear resistance, improved fatigue strength, and added surface lubricity. These clutch weights also offer great performance, and the ability to tune for many different applications or modifications in the future, without the need to buy extra parts.  The magnetic weights are the best option to properly place the mass where we need it on the weight for the best performance for your application.
• An initial setup guideline is included which shows the best setups for dunes, mud, or all-around trail riding. This also has brief instructions on installing your clutch kit, and other important information.  View our installation instruction video HERE 
• If you need a higher engaging spring for drag racing see HERE
• Do you ride trails and dunes?  While our weights are adjustable to compensate for nearly any condition, swapping a primary spring to gain RPM lost in the dunes is much simpler. Some may want our TEAL PRIMARY SPRING which increases peak RPM by 200-300, which is what is normally lost with paddle tires/sand.    This teal spring normally engages around 2100-2300 RPM which is slightly higher than our standard spring, but not crazy high or uncontrollable.
• Kits include AA Recoil magnetic adjustable clutch weights, primary spring, secondary spring, AA custom helix & setup guidelines/instructions.
• The only tool needed is our Compression Tool #1.  The primary components can be done with the clutch on the machine.  If you'd like to pull the primary to check the bolts behind it, or just to make installation easier, use this CLUTCH PULLER.  Warning: many of the XPT primary clutches are on the crank very tight (tapered fit).  If removing the primary, make sure you use plenty of grease on the puller tip and threads.  A hammer might be needed to pop the clutch off.
• We'd HIGHLY recommend using our Snap Ring Delete Kit when installing this kit on 2016-2018 models.  Makes life much easier!
• We also recommend our AA Primary Spring Limiter which helps reduce heat and centers the spring and our Primary Clutch Fan Blade (for stock clutch covers only, NOT for use with the Revolver Billet Clutch Cover) for reduced temps.
• Don't forget a new belt and we have the Worlds Best Belt by Gboost (our Stryker)
• We also highly suggest our Revolver Billet Clutch Cover with Tower Lock to increase primary clutch strength and cooling. (Note, will NOT fit with the AA Primary Clutch Fan Blade) 
• Primary and Secondary clutch in need of a rebuild? Check out our RZR Turbo Extreme HD Clutch Rebuild Kit.
• Part number: 103-1001-B